Effective motion detection
Motion detector can be used for detecting moving objects. Typically, video surveillance system needs to detect motion only in certain critical areas of the protected facility such as doors, gates, etc. Such approach is the most effective and allows to avoid false alarms.
When camera detects motion in one or more motion detection areas in the live video display, moving objects are shown in red box.
You can configure automatic response to an event, for example, the system can activate recording of video and audio signal from the camera, send SMS message or e-mail, add record to video archive, launch application, produce audio alarm, generate report, send command to the actuating device or assign other event-based actions.
Detection zones of any shape and size
In most cases there is no need to detect motion within the entire field of view of the camera. You can simply select detection zones in different areas of the camera image. To optimize motion detection, you can configure “exception areas” where movement detection is not needed.
For each zone you can select individual motion detection settings. You can select proportions and size of the object in the zone settings, and the system will detect moving object if it corresponds to specified aspect ratio or size.
Use templates to define size and proportions of object. When using a template, pre-view display appears with a schematic representation of objects where you can configure maximum and minimum size manually.
You can configure zone sensitivity, aspect ratio error, detection time, reset time and ignored objects (which are smaller than specified size). Advanced settings allow to fine tune motion detector and eliminate false alarms.